Granny Flats and Other Useful Ideas for Expansion

« Back to Home

Four Sensitive Areas to Consider When Building Your Home

Posted on

Are you planning to build a home in the near feature? If yes, then cost and safety are important aspects in such an endeavor. A house represents a substantial capital investment and every homeowner could make do with a realistic budget. Additionally, a home is intended for long-term use by loved ones. As such, you naturally want to put up a structure that will provide safety, protection, and longevity. However, achieving these goals requires you to stay on top of certain critical areas during construction. Failure to do so will result in substantial losses or endanger the lives of your loved ones. Here are three such critical areas.

Foundation -- As the adage goes, a house is as strong as its foundation. It is important to do proper consultation before breaking ground. It is even better to seek alternative advice from independent structural engineer to ensure that your foundation will support the weight of the house. Failure to consider this critical part can result in huge losses or worse. For example, if you do not use the right ratio of sand, ballast, and water, your foundation may give in especially if the intended home is huge. Alternatively, you might discover a problem midway construction and require rework.

Roofing -- The roof of your home is sensitive because it affects comfort and durability of your home. This call for special consideration before any construction work can commence. For example, if you do not take time with roofing requirements, you could end up with a leaking roof. Not only is a leaking roofing annoying, but it exposes the rest of the house to elements of weather and accelerate wear. Redoing a leaking roof can cost an arm and a leg depending on complexity.

Support Pillars -- A structural consultant will tell you that pillars are one of the most sensitive parts of a house. They carry the weight of the house in collaboration with the foundation. Pillar are also quite costly to setup. For example, high gauge steel, ballast, sand, and water are required in large quantities to put up a pillar. If something goes wrong, not only will the safety of your house be compromised, but also you will pay a premium for reworks. As such, pay particular attention this part of the house. Consult wide before commencing with construction to ensure you get the details right in the first place.

For more information, talk to a professional like Bill Jacobs Pty. Ltd.


Share