Granny Flats and Other Useful Ideas for Expansion

« Back to Home

Advice on how to wire a telephone by yourself

Posted on

Whether you need to install new phone lines and cables for your home or your business, provided that you have the necessary skills and experience, you can save money by telling the phone company that you will complete the installation process by yourself. However, if you have never completed a similar project before, you may cause some damage that will need to be fixed by a professional.

You are in a position to install the phone line once the phone company has put in the outside cable, as well as the junction box that is installed within your home. Here is some advice that will help you to effectively install a new phone line.

It's not as complicated as you think

Some people may not try to install the wiring themselves as they think that it is too complicated. This is simply not the case, as all you need to work with are two different wires. If your phone cable has multiple pairs of wires in it, you will be able to install one additional phone line for each pair that there is. If you need extra pairs, you can simply add an extension onto it.

When installing a cable, always use one that has extra pairs of wires than you will be using. You may want to install additional lines in the future, and the process will be made a lot easier if you already have the spare wires in place. On rare occasions, one of the wires may become defective, so you can easily use one of the spare wires to fix this problem.

Running in the cables

It can be a complicated job when you have to run the cables into a house that has already been built. The easiest way to get one set of cables from one floor or area to another is to run them through the plumbing stack. When these plumbing stacks have been installed, the plumber will often leave some room around them in which you slide the cabling through. The plumbing stack can be found by following the water pipe that starts at your water tank and works its way down the house.

Once you have the cable pulled through, all you have to do is attach a pair of alligator clips to the ends of the cables and clip them onto the wires of your phone system and you are ready to go.

However, if you have any trouble following these instructions, contact a telephone and data wiring service for assistance.